Wilton Horizontal Band Saws

Wilton is a recognized industry leader in the bandsaw business. The band saws offered on this page are of the highest quality.

Call to get a quote, or look at the bottom of this page for leasing options!

Bandsaw Model #3130

5" x 8" HORIZONTAL BANDSAWS

• A steel heat-treated worm driving a bronze worm gear gives smooth quiet operations of the gear box assembly.

• The WILTON oil bath drive train extends the production life of the machine parts.

• The blade guides adjust fully in three planes.

• The saw's sliding guide arm permits positioning close to the cut

STANDARD FEATURES 

• Adjustable hydraulic feed system
• Adjustable ball bearing guides
• Heat treated steel worm gear and bronze drive gear
• Automatic shut off at end of cut
• Handle & Wheels for convenient moving to various work stations

STANDARD EQUIPMENT

• 3230: Wet cutting saw included
• 1 gallon capacity coolant  system, 115V/lPh
• Complete with hose, flexible nozzle
• Shut-off valve, tank and baffle
• Eccentric Shaft & Ball Bearing Side Blade Guides
• Ball Bearing Rear Blade Guides

Model 3130 (DRY) - $737.00 plus freight
Model 3230 (WET) - $846.00 plus freight

Wilton Bandsaw Model #3410

7" x 12" HORIZONTAL BANDSAW

• The WILTON® 7x12 Metal Cutting Bandsaw is the ideal product for machine, maintenance and fabricating shop, and for limited run machine production work.

STANDARD FEATURES

• Blade Guides: Side: Eccentric shaft, ball bearing
• Rear: Ball bearings
• Blade drive is steel, heat treated worm, driving a bronze worm gear in oil bath
• Heavy duty cast iron saw head and table
• Oil bath hardened and ground worm gear
• Adjustable ball bearing blade guides
• Blade wheels are made of flanged cast iron
• Adjustable hydraulic feed system
• Automatic shut-off at end of cut

STANDARD EQUIPMENT

• Rapid acting vise
• Coolant Pump 1 gallon, 1 Ph motor.
• Wet cutting models complete with hose, flexible
  nozzle, shut-off valve, tank and baffle.

#3410 - $1305.00 plus freight

Wilton Model #7015

8" x 13" HORIZONTAL BANDSAW

• The WILTON® 8" x 13" horizontal cut-off bandsaw is built to deliver fast, accurate cutting on all types of material.

STANDARD FEATURES

• Heavy duty, rigid steel and  cast iron constructionof the head, and base provides full blade support and eliminate vibrations and deflection.
  
• The combination of an oil bath, gear reduction power train, along with precision blade guides and a hydraulic feedsystem delivers consistent, accurate cuts and longer blade life
• Conveniently located control panel, and any easily accessible coolant system

STANDARD EQUIPMENT

• Rapid acting vise (allowing miter cutting to 45 degrees)
• 1” High speed steel bandsaw blade

#7014 - $3380.00 plus freight

Wilton Models 7020/7040

10" x 16" HORIZONTAL BANDSAW

STANDARD FEATURES

• Variable Speed drive system
• Exclusive 6 Contact point blade guide assemblies
• Exclusive Swivel control panel
• One piece wheel cover
• Heavy duty, rugged transmission with hardened and ground gears
• Adjustable blade guides with 6 point contact combination bearing and carbide

STANDARD EQUIPMENT

• Patented 3-jaw rapid-action vise
• Recirculating coolant system standard,
• 1 GPM pump, 8 gallon
  reservoir and coolant applied through the blade guides
• Cast iron blade wheels

Price - $5325.00 free delivery

Wilton Models 7020M-7040M Mitering

10" x 16" MITER BANDSAW

STANDARD FEATURES

• Variable speed drive system allows the operator to fine-tune the blade speed fast and easily
• Exclusive 6 contact point blade adjustable guide assemblies
• Combined with the side bearings are carbide pads, the back of the blade rides on two load bearings mounted on a pivot shaft so both bearings share the load equally.
• Mitering Head - the work piece remains fixed while the head swivels to cut any angle 0°- 45°
• Heavy duty transmission utilizes hardened and ground gears operating in and oil bath
• Counter-balanced feed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder

STANDARD EQUIPMENT

• Exclusively PATENTED 3 jaw vise allows for faster set-up
• Recirculating coolant system standard ,1 GPM pump, 8 gallon reservoir and coolant applied through the blade guides
• Cast iron blade wheels

Price - $6639.00, delivered

Model #7060

12" x 20" Capacity

STANDARD FEATURES

• Variable speed drive system allows the operator to fine-tune the blade speed fast and easily
• Exclusive swivel control panel
• Heavy duty transmission utilizes hardened and ground gears operating in and oil bath
• Counterbalanced feed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
• Saw head raised hydraulically after each cut
• Cast iron band wheels

STANDARD EQUIPMENT

• Exclusively PATENTED 3 jaw vise allows for faster set-up
• Exclusive 6 contact point blade adjustable guide assemblies utilize cam follower bearings mounted on eccentric shafts on both sides of the blade. Combined with the side bearings are carbide pads, the back of the blade rides on two load bearings mounted on a pivot shaft so both bearings share the load equally.

#7060 - $9599.00, free delivery