16" Open-End Sander

• Available with or without digital readout
• Metal tipped safety stops are located inside the machine to stop sander immediately if belt breakage occurs
• Conveniently mounted load meter maintains constant check during operation
• Side access door for belt changes
• Automatic pneumatic conveyor belt tracking keeps belts centered
• Features a combination head which promotes a more consistent finish

STANDARD EQUIPMENT

• Motor
• Emergency rail stop
• Emergency stop button
• Dust collection port
• 17" x 54" sanding belt

Price - $7299.00
Free Shipping

Oscillating Edge Sander Model OES9138

• The new oscillating edge sander from Powermatic is full of features to handle all your edge sanding needs.
• The large 11 3 /4" x 48" table travels a full 8" in vertical height to accommodate all parts from tall to small. It will also tilt neg. 5 degrees and out to pos. 45 degrees for all the angles you need to run.
• The cast iron platen is a generous 48" x 9 1 /2" and covered with graphite for production sanding offering super support and cooler running toextend belt life. With 24 oscilla-tions per minute you can use the entire belt face without burning.
• A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with 2 sealed ball bearings for trouble-free performance.
• Dual dust collection ports keep the work area clean and extends the life of your abrasive belt.

#1791282 - $7374.00 plus freight

DDS-225 Dual Drum Sander

FEATURES

• 5 HP Motor
• Independently adjustable rear drum
• Hard Durometer rubber coating on steel drums
• 2 Speed Gearbox
• Full size cast iron table
• Forward/Reverse conveyor belt
• Dual dust collection with directional baffles

BENEFITS

• Plenty of power for production sanding
• Provides a fine micrometer adjustment for different grit paper
• Assures a flat, mar free finish with a high degree of accuracy
• Allows feed rates to match different types of woods
• Supports large workpiece and assures accuracy
• For fast and accurate set-up
• Promotes a clean work environment

 #1791290 - $4064.00 plus freight

Finally, a production class Dual Drum Sander that is loaded with features.  This machine features a 5HP Motor for plenty of power, the dual steel drums have a hard Durometer Rubber coating to assure a flat, marfree finish. n Independently Adjustable Rear drum makes fine tuning easy.  A heavy cast iron table incorporates 4 solid Jackscrews with chain drive timing to keep it level at all times.  The heavy-duty poly conveyor belt provides a positive grip on the stock.  The 1/4HP Feed motor is coupled to a 2 speed forward / reverse gearbox that will sand 8 and 10 surface feet per minute.  The heavy steel cabinet provides years of vibration free sanding, with plenty of storage space underneath.

Loaded with features, the new 31A from Powermatic can tackle the most demanding tasks. Full cast iron construction allows both metal and woodworking to be done on the same machine and the Integral Dual Dust Port keeps both belt and disc portions clean, extending abrasive life.

The articulating table mounted on the 6" x 48" belt sander head can be used vertically, horizontally, or angled to accommodate any job. The belt head has an indexing pin with stops at 0, 45 and 90 degrees and the head lock allows use at any angle in between.

Removing the top guard facilitates contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle.

Price - $1639.00 plus freight