Price $7843.00

Free Shipping

Model LBM21

This new 21 spindle line boring machine has everything needed to do 32mm line boring. It’s ideal for drilling shelf supports, hinges, etc. The LBM21 features a powerful 2-1/2HP motor that starts only when the pneumatic feed cycle is activated by the foot pedal, extending service life and saving power. Steel gears transmit plenty of power to the spindles at 2450 RPM. The large 20" x 28" table provides plenty of work support and slides on two tracks, keeping the fence parallel to the head at all times. A 60" fence with 4 flip stops locates material with precision. Two manual head mounted index pins provide precise positioning of longer stock.

2.5HP, 1Ph, 230V motor

Top drilling

21-spindle gear driven drill head with hardened steel gears

32mm spindle centers

11 right hand and 10 left hand spindles

10mm quick change spindle chucks

3450 RPM spindles

Head mounted index pins

0" – 2" drilling depth stroke

60" adjustable offset back fence

4 adjustable fence stops

6" maximum back fence offset

Price $11414.00 FOB Factory

Model# CBM21

• Construction Line Boring Machine
  
  This new single unit Construction boring machine has all the features to do case goods and framework, furniture fittings and 32mm line boring. The fully adjustable boring head can drill vertical or horizontal, and will lock at any angle in between. The 2-1/2 HP motor provides plenty of power at 2800 rpm at the spindles. Hardened steel gears transmit power to the 21 spindles, assuring many years’ performance. A large table size of 35" x 20" offers generous support for your work piece. With the 60" adjustable back fence, simply set any of the 4 flip stops provided for exact repetitive drilling every time.
  
  Twenty-one quick chucks also come standard, allowing hand removal of all bits for tool free, rapid set-ups. The unique flip down fences have built-in magnifiers for easy tape reading and stay attached to the machine, making it simple to change over from case goods to line drilling. A six position turret stop makes drilling depth adjustments simple. The clamp bar features a grip tite surface assuring pneumatic work hold downs stay in position.
  
  FEATURES

• 2.5HP, 1Ph, 230V Motor

• Bottom to top drilling

• 21 spindle gear driven drill head with hardened steel gears

• 32mm spindle centers

• 11 right hand and 10 left hand spindles

• 10mm quick change spindle chucks

• 3450 RPM spindles

• Pneumatic boring tilting head

• 60" adjustable back fence with 4 stops

• 0" – 3-1/8" drilling depth stroke

• Six position depth stops

• 2 adjustable fences for small and large panels

• Mechanical digital readout for boring unit