LTE - Low
Temperature Electric Ovens
for TEMPERING or DRAWING
Call to get a quote, or look at the bottom of this page for leasing options!
The LT Series Furnace with
Industrial Control Option.
To gain maximum temperature
uniformity, MIFCO LT (Low Temperature) Series Convection Furnaces are designed
with a stainless steel high velocity fan to force air evenly throughout the
load. The fan draws air in from the top of the stainless steel furnace chamber
and blows it over the heating elements to re-enter the furnace chamber through
orifices in the sides and bottom. The temperature control thermocouple is
located in the heated air stream where it enters the work load chamber;
therefore, the parts being heated can never exceed the control instrument set
point. The furnace is lined with four (4) inches of the finest high temperature
castable insulation for continuous operation and maximum efficiency.
The work load chamber, re-circulating fan and fan shaft, door
face, and load grid are made of chrome nickel, heat resistant stainless steel.
This steel will withstand continuous operating temperatures far in excess of the
1200° F operating range of the furnace, thus assuring exceptional service life.
(Furnaces larger than the LTE-1830 do not have the stainless chamber.)
Electric heating elements are readily accessible for replacement or repair.
On our smaller LT furnaces, the instrument panel is
located on the side of the furnace with convenient,
eye level controls. Larger
units have their controls mounted in either free standing or wall mounted,
NEMA 1 rated enclosures. Our Industrial
control packages are available on all models in addition to
many other instrumentation options.
Models LTE-3636-48 and larger are available in a car bottom design that is
hydraulically driven.
Dimensions and Specifications for
Convection Tempering Furnaces:
Temperature range of 100° to 1200° F.
Please call for further information & pricing.
|
| |
| FURNACE
MODEL |
DOOR
SIZE |
CHAMBER
|
OVERALL
|
FAN
MOTOR |
VOLTS |
Ph. |
FLOOR
SPACE
(Door Open) |
APPROX.
WEIGHT |
| LTE-1616 |
16" sq. |
|
|
1/2 hp
1725 rpm |
240/480 |
1 or 3 |
32 x 52 |
780 lbs. |
| LTE-1824 |
18" sq. |
|
|
1/2 hp
1725 rpm |
240/480 |
3 |
32 x 64 |
1,040 lbs. |
| LTE-1830 |
18" sq. |
|
|
1/2 hp
1725 rpm |
240/480 |
3 |
32 x 70 |
1,762 lbs.. |
| LTE-2424-36 |
24" sq. |
|
|
1 hp
1725 rpm |
240/480 |
3 |
42 x 78 |
2,400 lbs. |
| LTE-3030-36 |
30" sq. |
|
|
1 hp
1725 rpm |
240/480 |
3 |
48 x 85 |
2,800 lbs. |
| LTE-3030-42 |
30" sq. |
|
|
2 hp
1725 rpm |
240/480 |
3 |
48 x 90 |
3,100 lbs.. |
| LTE-3636-36 |
36" sq. |
|
|
2 hp
1725 rpm |
240/480 |
3 |
54 x 91 |
4,000 lbs. |
| LTE-3636-48 |
36" sq. |
|
|
2 hp
1725 rpm |
240/480 |
3 |
54 x 103 |
4,800 lbs. |
(Some overall dimensions are approximate and can vary, depending
on options installed.)
- MTE-2424-36 with Muffler
-
Dimensions and Specifications for Convection Tempering Furnaces:
Temperature range of 100° to 1200° F.
|
|
| |
| |
| FURNACE
MODEL |
DOOR
SIZE |
CHAMBER
|
OVERALL
|
FAN
MOTOR |
VOLTS |
Ph. |
FLOOR
SPACE
(Door Open) |
APPROX.
WEIGHT |
| LTE-4848-48 |
48" sq. |
|
|
2 hp
1725 rpm |
240/480 |
3 |
79w x 70d |
5,000 lbs. |
| LTE-4848-60 |
48" sq. |
|
|
2 hp
1725 rpm |
240/480 |
3 |
79w x 82d |
6,000 lbs. |
| LTE-4848-72 |
48" sq. |
|
|
2 hp
1725 rpm |
240/480 |
3 |
79w x 94d |
7,000 lbs. |
| LTE-6060-60 |
60" sq. |
|
|
2 hp
1725 rpm |
240/480 |
3 |
91w x 82d |
8,200 lbs. |
| LTE-6060-72 |
60" sq. |
|
|
2 hp
1725 rpm |
240/480 |
3 |
91w x 94d |
9,000 lbs. |
| LTE-6060-84 |
60" sq. |
|
|
2 hp
1725 rpm |
240/480 |
3 |
91w x 106d |
10,200 lbs. |
| LTE-6060-96 |
60" sq. |
|
|
2 hp
1725 rpm |
240/480 |
3 |
91w x 118d |
11,400 lbs. |
(Some overall dimensions are approximate
and can vary, depending on options installed.)
Machine Tools for Metal and Wood working
|
