Kalamazoo Industries, Inc
Kalamazoo Industries, Inc. has manufactured abrasive saws and grinders in Kalamazoo, Michigan since 1960.
Interested in a machine on this page? Call 503-581-1516 to get a quote, or look at the bottom of this page for leasing options!
|
|
7" Cut-Off Saw - 1HP
- Handles 1" solid round, 2" pipe
- Adjustable work length stop and down stop furnished
- 1/2" wheel arbor
K7B 7" cut-off saw comes with:
1 hp TEFC 110 Volt single phase motor, cord and plug, switch, Less abrasive wheel. 75 lbs 3450 RPM 6000 SFM Abrasive Saw
K7B $575.00 plus freight
|
|
8" Cut-Off Saw - 3HP
- Cuts 1-1/2" solid, 2" pipe
- Front and rear spark deflectors, standard
K8B 8" cut-off saw comes with:
3 HP TEFC motor 110/220 volt 1 phase or 220/440 3 phase, switch, less abrasive wheel. 90 lbs 3450 RPM Abrasive Chop saw 6000 SFM
K8B $685.00 plus freight
|
 |
|
 |
10" Cut-Off Saws - 3HP
- Big job capacity 1-1/2" solids, 2-1/2" pipe
- Swivel vise opens 4" - fast, lever-lock
- 5/8" arbor, sealed-for-life bearings
K10B 10" cut-off saw comes with:
3HP TEFC motor 110/220 volt 1 phase or 220/440 3 phase, switch, vise, less abrasive wheel (5/8" bore)
K10B Bench saw with swivel vise 120 lbs, $825.00
K10S Saw, swivel vise, steel stand 165lbs, $984.00
K10SF Saw, Chain vise, Steel stand 170 lbs, $1170.00
K10SW Saw, Swivel vise, Steel stand, with tray top (Wet) 190 lbs, $2795.00 |
|
12 and 14" Saws - 5HP
- Handles 2-1/2" solid round stock 3" pipe
- Heavy duty cast iron base, trunnion, and over arm
- Sealed ball bearings, 1" wheel arbor
- Positive, quick lock swivel vise, 4" opening
K12B - Bench saw, swivel vise, less switch
K12S - Floor saw, swivel vise, less switch
K12SS - Floor saw, swivel vise, manual switch
K14B - 165lbs
K14S - 200lbs
K14SS - 200lbs
K14SSF - 235lbs
K12SS-3 $2095.00 plus freight
K14SSF-3 $2240.00 plus freight
|
 |
|
|
12"-14" Wet Cut-Off Saw - 5HP
- Heavy Duty cast iron arm and trunnion
- 5HP 3Phase motor
- Twin cam vises
- Heavy duty base
- Coolant system 10 gallon
- uses 12" and 14" wheels
- Optional work length stop
- Capacity 2-1/2" solid, 3" pipe
K12-14 Wet Cut-Off Saw comes with:
5 HP, 3 Phase 220/440 volt with magnetic switch, coolant system, 10 gallon, two cam lock vises and splash guards, less wheel. Weight 590 lbs
K12-14W $3625.00 plus freight
|
|
16"-18" Cut-Off Saw - 10HP
- Rugged cast iron trunnion and over arm
- Super rigid, super accurate
- Fast , foot operated chain vise
- 1" wheel arbor, sealed ball bearing
- Heavy Duty guards, efficient spark chute
- Capacity Solid bar 3"
- Pipe and other shapes 4"
- Table 16" x 28"
- Wheel arbor 1"
K16-18 Saw comes with:
10 HP TEFC motor 220/440 volt 3 phase, manual starter with overload, less abrasive wheel 1725 RPM, 10400 sfpm. Weight 625 lbs
K16-18 $2450.00 plus freight |
|
|
|
20" Cut-Off Saw - 15HP
- Rugged cast iron trunnion and over arm, super rigid, Super accurate.
- Fast foot operated chain vise
- 1" wheel arbor, sealed ball bearings
- Heavy Duty guards, efficient spark chute
- Multiple V belt motor drive
- Solid bar capacity of 4"
- Shapes 6"
- Table 18" x 30"
K20SSF 20" Cut-Off Saw comes with:
15 HP TEFC motor 220/440 volt 3 phase, manual starter with overload, adjustable down stop, less abrasive wheel, 1725 rpm 13000 sfpm. Weight 675 lbs
K20SSF/220 $3150.00 plus freight
K20SSF/440 $2950.00 plus freight |
|
|
26" Abrasive Saw - 20HP
- Two cam vise 4-1/2" high
- Cog belt drive
- 1800 Rpm
- 7" Flange
- 1" arbor
- 32"x42"x26" table
- 9"x16" opening in Guard
- Cuts angles up to 45 degrees
- Cuts 7" pipe, 5" solids, 8" shapes, 12" channels
K26S 26" Abrasive Saw comes with:
20HP 3 phase, magnetic control, 15000SFPM 900lbs. Options available, power downfeed, Wet tray with coolant pump, oscillation on head, vacuum dust collector.
K26S $6195.00 plus freight |
|
|
|
10" Abrasive Mitering Chop Saw - 3HP
- Angles from 0-45 either way
KM10 - 10" miter Saw 1 or 3 Phase 220lbs
WS10 - Adjustable work stop
12-0 - Heavy Duty Stand
12-W - Tray top stand for wet sawing
KM10-1 $1095.00 plus freight
KM10-3 $1085.00 plus freight |
|
14" Mitering Saw - 5HP
- Angles from 0-45 degrees
- 1" spindle
- Front lever lock
- Heavy Duty stand
- 2-1/2" solids, 3" pipe
#KM14 14" Miter Saw comes with:
5HP motor, less wheel
KM14-1 $2795.00 plus freight
KM14-3 $2595.00 plus freight |
 |
|
 |
16"-18" Abrasive Miter Saw - 10HP
- Miters either direction 45 degrees
- Straight cut 3" solids, 4-1/2" pipe and shapes
- 45 degree cut 2-1/2" solids, 4" shapes
KM16-18 16" or 18" Abrasive Miter Saw comes with:
10 HP motor 3 phase, miters either direction 45 degrees, Two cam vises, Low voltage manual control, Less abrasive wheel. Weight 650 lbs
KM16-18 $3350.00 plus freight |
|
20"-22" Abrasive Miter Saw - 15HP
- 15 HP motor
- Manual starter
- Air operated chain vise
- Straight cut 4" solids, 6" most shapes
- 45 degree cut 3" solids, 5" shapes
#KM20-22 20" Abrasive Miter Saw comes with:
15 HP motor, Less abrasive wheel. Weight 1000 lbs
#KM20-22W 20" Wet Abrasive Saw comes with:
Same as above with wet system and magnetic starter. Weight 1295 lbs
KM20-22/15 $5895.00 plus freight
KM20-22W/15 $8350.00 plus freight |
|
|
|
High Speed Non-Ferrous Miter Saw - 5HP
- 14" blade capacity (blade not furnished)
- Double V belt drive
- 5HP 3 phase1725 rpm motor with Magnetic starter
- Power down feed
- SFPM 6250 or 12,500 w3450 rpm motor
- Double air vise
- Miter both ways
- Vise opens 6"
- Arbor size 1"
- Capacity 4-1/2" pipe, 4-1/2" Square
HSM14 14" High Speed Miter Saw comes with:
5 HP 3 phase motor, 1725 or 3450 rpm magnetic starter. Weight 500lbs
NON-FERROUS ONLY
HSM14 $5995.00 plus freight
|
|
3" x 90" Belt Grinder - 2HP
- 3" x 90" belt
- 8" contact wheel
- Direct Drive
- Air tensioning
- Multi-position through vertical
- Optional built-in vacuum
- 2HP 1 or 3 phase
- 40 lbs shop air needed
- 6900 SFPM
KS-390 Belt grinder comes with:
2HP motor 1 or 3 phase manual switch, air gauge, with valve. Weight 265 lbs
KS-390V comes with:
same as above plus built-in vacuum.
KS390 $2195.00 plus freight
KS390V $2395.00 plus freight |
|
|
|
8" x 60" Belt Grinder - 7.5HP
- 8" x 60" Belt
- 7-1/2 HP 3 phase motor
- Twin belt drive
- Replaceable platen
- Cast iron table 8" x 12"
- Platen working surface 8" x 12"
- Air tension on belt, 40 to 80 lbs of shop air, air gauge and valve included
Model #S8D 8" Sander, Dry comes with:
7-1/2HP 3 phase. Magnetic switch with jog button 560 lbs
S8HD 8" Horizontal Sander, Dry $4995.00 plus freight
S8W 8" Sander, Wet $5395.00 plus freight
|
|
14" x 103" Wide Belt Grinder - 15HP
- 15 HP motor 3 phase
- magnetic switch with jog button
- Belt 14" x 103"
- Platen work surface 14" x 36"
- coolant system with tank
S14HD Wide Belt Grinder comes with:
15HP motor, 3 phase. Coolant system with tank. Weight 1600lbs
S14HD Wide Belt Grinder, Dry
S14HD Wide Belt Grinder, Wet
S14HD Wide Belt Grinder, Dry $11,225.00 plus freight
S14HW Wide Belt Grinder, Wet $12,175.00 plus freight
|
|
|
