-
Cast Iron Saw head swivels in two directions, 0-60 degrees (R) and 0-45
degrees (L) it has direct gear drive.
-
Manual
down feed is operated by pulling down on handle and pushing the trigger switch.
-
Hydraulic down feed can be adjusted by
operator. Coolant pump cools
blade and assists chip removal system.
-
Broken blade detection device
shuts down machine if blade breaks.
-
BS-260MHDSV is a 9" Gear Driven Band Saw
and is the perfect saw for cutting at 90 degrees or miter angles. Dual angle head capable of cutting 0-60 degrees (R) and 0-45
(L) Quick
releases for miter angle ichanges in seconds.All
gear driven band saw have variable speed, miter
heads, and a hydraulic controlled downfeed for perfect feeds and
longer blade life.
Coolant system and a broken blade tensioning devise are standard equipment.
-
The MHDSV series bandsaw
-
1- Manual downfeed The operator simply turns on the machine with a trigger switch in
the downfeed handle,
-
2- Hydraulic downfeed
for larger production runs. Capacities are 8" x 9-1/2"
rectangle. 220V, Single Phase,
60 Hertz.
