Model 30AUTO
The Crozier Model 30AUTO Automotive Speed Lathe is the industry standard for the production polishing of rotors and armatures.  The air-collet closure and electric brake speed up the polishing operation.  The 3/4 horsepower fixed speed motor is set for the optimum polishing speed for both the copper slip rings and commutator.  The bearing surfaces are easily polished with emery cloth.  The air-collet closure grips the parts tight and when finished, release the part with minimal effort.  A large double row front bearing is on the collet end.  Standard 5C collets are used.  This has been the standard polisher in the automotive aftermarket since 1982.  Don't be fooled by the imitators.  Insist on the original.

Interested in a machine on this page? Call 503-581-1516 to get a quote, or look at the bottom of this page for leasing options!

Model 60AUTO
The Crozier Model 60AUTO Automotive Speed Lathe is designed for the production polishing the CS130 rotor.  A large OEM asked us to come up with a simple but reliable machine to cut down the handling of this part.  The result is the Model 60AUTO.  This unit has two side-by-side spindles driven by a common motor.  Both collet closures operate of a single foot valve.  Each spindle is set up with a different size collet.  The rotor is inserted in the first collet and the exposed parts are cleaned and polished.  Then the spindle is stopped (1/2 second) and the part is reversed and put on the other spindle.  The complete process is handled in one setup.  This machine is suitable for any armature or rotor with two different shaft sizes.

Model 100AUTO
The Crozier Model 100AUTO Automotive Speed Lathe is a specialty rotor and armature lathe is a specialty lathe for the production cutting of rotor slip rings.  The lathe utilizes simple logic to move the slides in a rectangular motion to achieve an accurate and fast cut.  Once the setup is completed, the parts being cut will be produced to the same dimensions.  Minor adjustments can be made in seconds.

Model 150AUTO
The Crozier Model 150AUTO Automotive Speed Lathe is a specialty rotor and armature lathe equipped with a computer controlled X-Z slide. Standard features include a variable speed head, air-collet closure and air tailstock with a collet live center. The part is held by a collet on both ends insuring that the rotor or armature is cut concentric to the bearing surfaces. This will give both the best and fastest cut available in a small lathe.  Programming is fast and easy with the PC controller. The machine operates under WINDOWS. The machine comes complete, ready to run, at a very affordable price. If you need to meet the OEM rebuilt specifications, even if you only turn 100 units per day, this is the machine for you.                                                   

Standard Features   X Travel is 8 inches Y travel is 6 inches Linear Guides Ground Ball Screws Tail Stock 2 HP, Variable Speed Motor 5C Spindle Air-Collet Closure PC based Control (Windows) Brushless Drives Small Footprint 240 Volt / 1 or 3 Phase   $21,500.00