JESSE Engineering

On the shores of Washington State's Puget Sound, brisk international trade and a thriving economy meet the natural beauty of the Pacific Northwest.  This vibrant atmosphere has been home to Jesse Engineering since 1976.  Its location on the deep-water port of Tacoma - a hub for Asian commerce and trade - and the company's consistent, customer-oriented approach to its business are the driving factors behind Jesse's success worldwide.

Interested in a machine on this page? Call 503-581-1516 to get a quote, or look at the bottom of this page for leasing options!

Options

• Programmable pressure die boost (with PLC only)
• 6 distance between bend stops
• Mandrel lubricator
• Wiper die mount
• Load length extended to 20'

T-65

• 2", schedule 40, steel pipe
• 2½" OD, 11 gauge, steel tube
• Programmable NC Bend Stop
• Joystick Control
• 180 degree bends
• Overhead clamp
• 12' Load length
• Mandrel rod
• Material positioning stop
• Maximum CLR: 6"
• Bend speed: 1RPM
• Return speed: 5RPM
• Horsepower: 2
• Power: 220v, single phase
• 77"L x 43"W x 44"H (161"L with 12' load length)

T-65 S

• 2", schedule 80, steel pipe
• Programmable NC Bend Stop
• Joystick Control
• Overhead clamp
• 12' Load length
• Mandrel extractor
• Material positioning stop
• Maximum CLR: 6"
• Bend speed: 1.3RPM
• Return speed: 5RPM
• Horsepower: 3
• Power: 220v, single phase
• 77"L x 43"W x 44"H (194"L with 12' load length)

T-65 PLC

• 2", schedule 80, steel pipe
• Programmable PLC control with joysticks
• 6-bend sequence
• Manual or semi-automatic mode
• Overhead clamp
• 12' Load length
• Mandrel extractor
• Material positioning stop
• Maximum CLR: 6"
• Bend speed: 1.3RPM
• Return speed: 5RPM
• Horsepower: 3
• Power: 220v, single phase
• 77"L x 43"W x 44"H (194"L with 12' load length)

T-65 Exhaust Tube Special
3" OD 16 Gauge steel tubes

• 6-foot load length
• Mandrel extraction unit
• Mandrel Lubrication
• Wiper die mount
• Pressure die assist
• Exhaust tube kit
• Programmable PLC Control
• Multi-bend sequence
• Pushbutton controls
• 220 volt single phase
• includes MPS-2 manual positioning system
• Air-actuated chuck
• Digital readouts for rotation and carriage position

Manual Bender 1004A

• 4" Schedule 80 pipe
• (4.500" x 0.337" wall)
• 114.3mm OD x 8.5mm Wall

Manual Bender 1006A

• 6" Schedule 80 pipe
• (6.625" x 0.432" Wall)
• 168.3mm OD x 10.9mm wall

Manual Bender 1008A

• 8" Schedule 80 pipe
• (8.625" x 0.500" Wall)
• 219.1mm OD x 12.7mm Wall

CNC Benders

CNC Bender 1003A CNC

• 3" Schedule 80 pipe
• (3.500" x 0.300" Wall)
• 88.9mm OD x 7.6mm Wall

CNC Bender 1006A CNC

• 6" Schedule 80 pipe
• (6.625" x 0.432" Wall)
• 168.3mm OD x 10.9mm Wall

CNC Bender 1008A CNC

• 8" Schedule 80 pipe
• 8.625" x 0500" wall
• 219.1mm OD x 12.7mm Wall

CNC II Controller

• Industrial PC, Pentium processor
• Touch Screen
• Bend recipe storage
• Spring-back calculations
• YBC or XYZ data entry
• Network adaptor
• Manual, semi, or automatic mode
• Graphical bender representation